400LM Roll Waterproofing Membrane Rubberfuse TPO FleeceBack Single-Ply

DESCRIPTION

Rubberfuse / Sintofoil FB (FleeceBack) Single-Ply Waterproofing TPO Membranes are Synthetic waterproofing membranes produced by co-extruding a uniform UV resistant elastomerized Thermoplastic PolyOlefin (TPO) and Flexible Polypropylene Alloy (FPA), bonded on the lower face to a nonwoven polyester fabric reinforcing mat.
Used for Roofs, Decks, Basements, Balconies, Ponds, Water Tanks, Green/Living Roofs and other Waterproofing applications.

TPO/FPA (Flexible Polypropylene Alloy) membrane produced by extrusion of granules resulting from the incorporation of ethylene propylene rubber into a propylene matrix together with other additives as appropriate to the type of membrane. A synthetic polyester fleece is applied on the bottom part of the membrane, leaving a selvedge on both sides.

Rubberfuse FB (Fleece Back TPO) membrane is used with either roller-applied or spray-applied adhesives which are applied directly to the substrate, timber or approved tissue-faced PIR insulation, creating a strong bond.

The membrane features contrasting colours on its upper and lower faces, providing a signal layer so that any damage occurring during or after installation will be immediately apparent.

Sintofoil FB Membranes comply with CE marking requirements.

Applications:
Roofing of non-accessible Roofs on various substrates: Concrete, Steel Deck and Wood.
Balconies.
Gutters.
Basements.
Waterproofing of Parking Decks, Gravel Roofs and Garden Roofs (Green / Living Roofs).
Refurbishment of waterproof bitumen covering materials.
Lining the inside of Ponds and Water Tanks.

Features:
Resistance to wind uplift.
Mechanical, puncture and hail resistance.
Resistance to foot traffic for limited, irregular pedestrian access only.
Very high resistance to weathering and UV rays (higher UV resistance rating than EPDM).
No chlorine, lead or other heavy metals or polluting materials.
The light grey colour reflect heat while keeping building interiors cooler.
Mould & Rot-proof.
Root resistance.
Flexibility and suppleness (even at low temperatures).
Compatibility with bitumen and related products.
Excellent weldability and easy repairability during the entire service life of the works.
Easy inspection of the welds.
Exceeds EnergyStar standards for energy efficiency.
High ageing resistance, expected lifespan in excess of 40 years.
Total recyclability and environmental compatibility.
Weight: 1.24kg/m2.

Installation:
Sintofoil FB Membranes are glued to the surface with adhesive on the Fleece part.
2 or more strips are joined easily by bonding the 75mm overlap with a hot air gun, no adhesives are required to join the seams.

Sheet on Each Roll is 1.6mm Thick x 1075mm Wide x 400m Long.
Colour is Light Grey.

Per Roll Dimensions: 1075mm Wide x 950mm Diameter, Weight: 504kg.

Made in Italy by: Imper Italia S.p.A. / Rubberfuse Division:
Product Page:
Brochure:
Data Sheet:
Specification.pdf
Certifications:
Green / Living Roofing Guide:
Call if you would like to discuss or to come inspect it.

We are at .
You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.