New Endress+Hauser DN300, Proline Promag W 400 Electromagnetic Flowmeter

DESCRIPTION

The world's first electromagnetic flowmeter for unrestricted measurement. The best-performing flowmeter for all applications in water distribution as well as wastewater treatment. Made in France by Endress+Hauser. FEATURES & BENEFITS: * The first and only electromagnetic flowmeter with no inlet and outlet runs (0 x DN) as well as no pipe restriction (full-bore design) and thus no pressure loss. * Measure reliably independent of flow profile and mounting location. * Installation directly after bends, perfect for space-restricted areas and on skids. * Industry-optimized flowmeter with internationally recognized drinking water approvals. * Heartbeat Verification for reliable fulfillment of traceability requirements in accordance with ISO 9001. * Reliable measured values thanks to innovative signal analysis and processing. * Based on tried-and-tested sensors: installed successfully in over 3 million applications since 1977. SPECIFICATIONS: * Measuring principle: Electromagnetic. * Measured variables: Volume flow, conductivity, mass flow. * Measuring / Flow range (Qmax): 40,000 L/min = 2,400 m3/h (10,567gal/min). Sensor features: * EN ISO 12944 corrosion protection for underground or underwater installation. * International drinking water approvals. * Degree of protection IP68 (Type 6P enclosure). * Approved for custody transfer to MI-001/OIML R49. Transmitter features: * Safe operation no need to open the device due to display with touch control, background lighting. * Timesaving local operation without additional software and hardware integrated web server. * Integrated verification Heartbeat Technology. * Transmitter housing made of durable polycarbonate or aluminium. * WLAN access. Integrated data logger: measured values monitoring. Wetted materials: * Liner material hard rubber: 0 to +80 °C (+32 to +176 °F) * Liner material polyurethane: 20 to +50 °C (4 to +122 °F) * Liner material PTFE: 20 to +90 °C (4 to +194 °F) * Electrodes: 1.4435 (316L); Alloy C22, 2.4602 (UNS N06022); Tantalum Max. measurement error: * Volume flow (standard): ±0.5 % o.r. ± 1 mm/s (0.04 in/s) * Volume flow (option): ±0.2 % o.r. ± 2 mm/s (0.08 in/s), Flat Spec * Sensor housing material: AlSi10Mg, coated. * Transmitter housing material: Polycarbonate; AlSi10Mg, coated. * Display/Operation: 4line backlit display with touch control (operation from outside), Configuration via local display, web browser and operating tools possible. * Outputs: 020 mA/420 mA HART (active), Pulse/frequency/switch output (passive), Pulse/frequency output (passive), Switch output (passive). * Digital communication: HART, PROFIBUS DP, EtherNet/IP, Modbus RS485. * Hygienic approvals and certificates: Drinking water approval: ACS, KTW/W270, NSF 61, WRAS BS 6920. Product Page: https://www.au.endress.com/en/field-instruments-overview/flow-measurement-product-overview/electromagnetic-flowmeter-promag-w400-5w4c Video: https://www.au.endress.com/_storage/asset/8649316/storage/master/file/28399667/Promag-W-300-400-500_0%20x%20DN%20full%20bore_PCF_2019_EN_1080p_V01.mp4 Data Sheet: https://portal.endress.com/dla/5001122/0557/000/02/IN01143DEN_0322.pdf Technical Information: https://www.instrumart.com/assets/EH-W400-Datasheet.pdf Operating Instructions: https://portal.endress.com/wa001/dla/5000523/1581/000/03/BA01063DEN_0415.pdf Overall Dimensions (with meter & cables inside): 455mm Wide, 494mm Long, 590mm High. Weight: 68kg. Call if you would like to discuss or to come inspect it. We are at . You can pick up, we can deliver to a reasonable distance for an agreed fee, or we can arrange freight within Australia.