1011KY TEMPERATURE DIGITAL MULTIMETER CAT3 RATED & TEMPERATURE

DESCRIPTION

1011 KYORITSU COMPACT DIGITAL MULTIMETER WITH TEMPERATURE

Kyoritsu 2010 Multimeter Product Selection Guide (442kb PDFfile)

High performance and wide range digital multimeter from the world class manufacturer, Kyoritsu.

Temperature measurement, selectable for ºC and ºF
6040 counts with Bar Graph display
MIN/MAX function enables to record min & max value
REL(relative value) function to indicate the measurement variation

Designed to international safety standards IEC61010-1 CAT.III 300V / CAT.II 600V
Included accessories:

Test leads, temperature probe, batteries & manual.
FEATURES:
6040 counts with Bar Graph display
MIN/MAX function enables to record min & max value
REL(relative value) function to indicate the measurement variation:
Saving the initial value at the start of measurement as a reference value(= zero). The difference between the later measured values andthe reference
value is indicated on the display
Temperature measurement, selectable for ˚C and ˚F (KEW 1011)
supplied with K-type temperature probe (8216): -50~300 ˚C (-58~572˚F)
DUTY function
(It is possible to measure Pulse width / Pulse period)
Data Hold function, Auto Power Off function
Continuity with buzzer and Diode Check function
Capacity measurement of capacitors
Current ranges are protected by fuses (600V ceramic)
Designed to meet international safety standards: IEC61010-1 CAT.III 300V / CAT.II 600V
SPECIFICATIONS:
DC V 600.0mV/6.000/60.00/600.0/600V
(Input Impedance: 10MΩ, 100MΩ only 600mV)
t (600.0mV/6.000/60.00/600.0V)
t (600V)
AC V 6.000/60.00/600.0/600V
(Input Impedance: 10MΩ)
t (6.000/60.00/600.0V)
t (600V)
DC A 600/6000µA/60/600mA/6/10A
t (600/6000µA/60/600mA)
t (6/10A)
AC A 600/6000µA/60/600mA/6/10A
t (600/6000µA/60/600mA)
t (6/10A)
Ω 600Ω/6/60/600kΩ/6/60MΩ
t (600Ω/6/60/600kΩ/6MΩ)
t (60MΩ)
Continuity buzzer 0~600Ω (Buzzer sounds below 100Ω)
Diode Check 2.8V Release Voltage:Approx. 0.4mATest Current
Capacitance 40/400nF/4/40/400/4000µF
Frequency 10/100/1000Hz/10/100/1000kHz/10MHz
DUTY 0.1~99.9% (Pulse width/Pulse period)
t (~10kHz)
Temperature -50~300ºC (-58~572ºF)
(with the use of Temperature probe 8216)

Note: KEW 1011 can measure max. 700ºC
In order to measure over 300ºC, please use a K-type temperature probe available in the market.

Display 6040 Counts
Withstand Voltage AC 3700V / 1min.
Applicable standards IEC 61010-1 CAT.III 300V Pollutiondegree 2
IEC 61010-1 CAT.II 600V Pollution degree 2
IEC 61010-031
IEC 61326
Power Source R6P (1.5V) × 2 (Auto-power-OFF within 15 minutes)
Dimensions 161(L) × 82(W) × 50(D)mm
Weight Approx. 280g
Accessories KTL04 (Test Lead)
8216 (K-type Temperature probe)
0.8A/600V (Ceramic Fuse) × 1built-in
10A/600V (Ceramic Fuse) × 1built-in
R6P × 2Instruction Manual

Weight: 0.4920 kg
Barcode Number: 4560187060724