Project Xtension 10 Evolution Turntabl3

DESCRIPTION

Project Xtension 10 Evolution

The little brother of Xtension guarantees superlative vinyl performance in a more compact size!   

 

 

Xtension 10 Evolution is ideal for all, who look for sound quality of standard Xtension in a more compact size below 48cm width, to fit standard audio racks. It incorporates all of their 20 years experience in turntable design. Xtension 10 chassis is made from MDF filled with metal sand, that gives high mass and is non-resonant. Magnetic feet, which decouple the main plinth from its base, are combined with a weighty 22kg total turntable mass. The result is a unique combination of 'mass loaded' and 'floating turntable' design principles.  

Instead of the old standard adoption of pure metal used for the main platter, they've found a perfect alloy which we damped on the inner side with Sorbothane®. Additionally they've glued recycled Vinyl records to the top (which act as a perfect mat) and bake this 'sandwich' before precision balancing it. The final product subsequently benefits from a wonderfully resonance-free, heavy platter, that runs ultra silently on an inverted ceramic ball bearing with magnetic suspension.  

The ProJect 10cc Evolution with its tonearm base also benefits from 'high-mass' technologies, and is isolated from the main board by a sheet of Sorbothane®. To use this tonearm with a wide range of top quality phono cartridges, from 4 to 14g. it comes with a set of 4 different Sorbothane®- damped counterweights. Xtension 10 Evolution comes with a beautiful dustcover with adjustable hinges, as well as in high gloss lacquer finishes: mahogany, piano and olive (available on special order).  

Key Features 
Super-heavy 22 kg belt drive turntable  
Mass loaded magnetic floating sub chassis  
Precision balanced sandwich-platter  
Inverted ceramic ball bearing with magnetic support  
Heavy weight record clamp  
Extremely low level of natural resonance  
Perfect decoupling through magnetic feet  
Electronic speed control 33/45/78 Upm  
Tonearm 10cc Evolution made from carbon fibre  
Inverted tonearm bearings (ABEC 7 quality)  
Dust Cover included
Product Specifications
Speed 33, 45, 78 (electronic speed change)
Principle Belt drive
Platter 10.3 kg/300 mm aluminium (TPE damped)
Main bearing Inverted stainless steel with ceramic ball with antimagnetic support
Wow & flutter ± 0.01% (max)
Speed variance ± 0.09% (max)
Signal to Noise 73 dB
Tonearm 10” cc EVO, Carbon
Effective arm length 254 mm
Effective tonearmmass 8.5 g
Overhang 16.0 mm
Tracking force range 10 - 30 mN
Cartridge weight range 4 - 14 g (4 different counterweights included)
Included accessory Power supply, dust cover
Power consumption 2 Watts
Dimensions 480 x 235 x 400 mm (WxHxD)
Weight 26 kg net

 

*Reprint from manufacturers website