2049CRC 340G URETHANE SEAL COAT PROTECTIVE FILM CRC

CLEAR URETHANE - ELECTRICAL / ELECTRONIC INSULATOR CRC Clear Urethane is a stable single component polyurethane coating for electrical and electronicapplications. It dries fast, adheres well and forms a hard, durable, flexible and non conductive film for electrical motor windings and armature coils CRC Urethane Seal Coats are an excellent adhering one-component polyurethane coatings. Its abrasive resistant insulation acts as a protective film, for electrical and electronic applications. CRC Urethane Seal Coats are stable single component polyurethane coating that dries fast, adheres well and forms a hard, durable, flexible and non-conductive film. Applications: Recommended for: Protecting components from condensation and moisture Protecting printed circuit boards. Insulates cables and wires Coating terminal strips, screw connections, and switch boxes that are exposed to atmospheric effects. Coating for Electric motor windings, armature coils, commutator ends, transformer ends. Coating for housings and bus bars. Protective coating for tools. FEATURES: Clear or Red. Available in two conformal colours. Humidity and Salt Spray Resistant. Provides heavy corrosion protection to preserve and lengthen useful life of equipment. Protection. Offers protective resistance to shocks, abrasion and aggressive chemicals atmospheres. High Dielectric Strength, and a high surface and volume resistivity which, when combined with a low dielectric constant and dissipation factor, are necessary for successful electrical and electronic applications. SPECIFICATIONS: Flash Point: 43°C Open Cup Boiling Point: 800°C Initial Odour: Of organic solvent % Volatile: 86% Appearance: Colourless or Red film Specific Gravity: 0.86 /- 0.02 Dielectric Constant: 4.04 at 60Hz Volume Resistance: 8.4 @ 10 ohms/cm Surface Resistance: 1.2 @ 10 ohms/cm Viscosity: 13s (Ford Cup) Propellant: Hydrocarbon Performance Characteristics: Type of Film: Drying time = approx 1 hour A Thickness of Three Coats: Dielectric resistance of 16kV Breakdown Voltage: 20 kV/mm Creep Resistance: 600V (DIN IEC112/VDE 0303 Part 1) Endurance Thermal Stability: 100°C Temporary Thermal Stability: 120°C Low Temperature Stability: Minus 70°C Corrosion resistance: Up to 2 years outdoors Weight: 0.4110 kg Barcode Number: 9310832020499