MARINE6 6" IP66 MARINE GRADE SPEAKERS B&W

OVERVIEW MARINE6 6" IP66 MARINE GRADE SPEAKER - B&W SEE NOTHING, HEAR EVERYTHING The marine environment is unforgiving. Any equipment has to survive extremes of temperature, salt spray and hosing down. It's little wonder then that most speakers designed for marine applications sacrifice sound quality for ruggedness. Of course, any Bowers & Wilkins speaker must sound brilliant. So these marine speakers were first designed to match exacting sound qualitystandards, then the necessary toughness to survive the harshmarine environment was added. Both models boast IP66 ratingswhen properly installed, and the metal grille and all screwsare marine-grade stainless steel. The driver chassis uses a non-corroding rigid polymer and the tweeter dome has a rear support to prevent permanent deformation when hosed down. Marine 6 and Marine 8 are super-tough to deal with the most demanding installation environments, with Bowers & Wilkins superior, uncompromising audio quality. SPECIFICATIONS Description 2-way system Drive Units 1x Ø25mm (1 in) soft dome tweeter 1x Ø150mm (6 in) polypropylene cone bass/midrange Frequency range (-6dB) 43Hz – 26kHz Recommended Amplifier Power 20W – 80W Sensitivity 88dB (2.83V, 1m) Nominal Impedance 8Ω (4Ω minimum) Outer diameter Ø243mm (9.6 in) Cut-out diameter Ø202mm (8 in) Depth behind surface 88mm (3.5 in) Protrusion 8mm (0.3 in) Net weight 1.4kg (3.1 lb) Pre-mount Kit PMK C6 Weight: 3.70 kg