Consumer Electronics
HS4.8BLK-100M 4.8MM X 100M HEAT SHRINK BOX BLACK

$149
Verified seller
Description
HEATSHRINK THIN WALL 4.8MM BLACK 100M BOX
Flame retardant tubing made from Electron Beam Cross Linked Polyolefin
Operating temperature -75 to 135 degrees Celsius
Resistant to common fluids, solvents and abrasion
UV resistant
Available also in Blue, Clear, Green, Red. White, Yellow and Yellow/Green colours.
The CABAC XLP range of thin wall heat shrink tubing is used to insulate, protect and colour code conductors in a range of applications related to the electrical and associated industries. This general-purpose heat shrink provides electrical and mechanical protection, while also defending against environmental factors such as common fluids and/or solvents. Our blue thin wall heat shrink sleeving is flexible, flame retardant, and resistant to impact, abrasion and UV radiation.
The XLP range of heat shrink tubing is made from polyolefin that has been cross-linked using high-energy electron beam technology. Upon the application of heat, the tubing will shrink down to approximately 50% of its pre-shrink diameter to deliver tight-fitting electrical and environmental insulation. To shrink our heat shrink tubing, we recommend the use of a CABAC heat gun (Part No. HG2232 or HG2233).
CABAC blue polyolefin heat shrink tubing is UL certified and complies with a number of international standards, including ASTM D2671.
DIMENSIONS
Pre-shrink diameter: 4.8mm
After-shrink diameter: 2.4mm
Recovered wall thickness: 0.48mm
Length: 100m roll
XLP tubing is available in a wide range of colours and sizes from 1.5mm to 125mm. The product datasheet includes a selection chart for your reference, see Resources.
TECHNICAL DATA
Compliant Standards: UL224 VW1 File No. E366157, ASTM D2671
Continuous Operating Temp: -75 to 135 degrees Celsius
Shrinkage Temp: > 105 degrees Celsius
Longitudinal Shrinkage
Tensile Strength: 10.4 MPa
Breakdown Voltage: 25 kV/mm wall thickness
Elongation at Break Point: 400%
Water Absorption: 0.15% max
Voltage Rating: 600V
Heat Shock: 250 degrees for 4 hours
PLEASE NOTE: The full range of XLP heatshrink is UV stabilised except clear. Non-black colour variants will fade slightly or change colour over time dependent upon the strength of the UV radiation without impacting the materials functional characteristics
Heatshrink Colour: Black
Heatshrink Type: Thin Wall Tube
Product Colour: Black
Wall: Thin
Pre-Shrink Diameter (mm): 4.8
After-Shrink Diameter (mm): 2.4
Heatshrink Tube Length (M): 100
Recovered Wall Thickness (mm): 0.48
Glue Lined: No
Flame retardant tubing made from Electron Beam Cross Linked Polyolefin
Operating temperature -75 to 135 degrees Celsius
Resistant to common fluids, solvents and abrasion
UV resistant
Available also in Blue, Clear, Green, Red. White, Yellow and Yellow/Green colours.
The CABAC XLP range of thin wall heat shrink tubing is used to insulate, protect and colour code conductors in a range of applications related to the electrical and associated industries. This general-purpose heat shrink provides electrical and mechanical protection, while also defending against environmental factors such as common fluids and/or solvents. Our blue thin wall heat shrink sleeving is flexible, flame retardant, and resistant to impact, abrasion and UV radiation.
The XLP range of heat shrink tubing is made from polyolefin that has been cross-linked using high-energy electron beam technology. Upon the application of heat, the tubing will shrink down to approximately 50% of its pre-shrink diameter to deliver tight-fitting electrical and environmental insulation. To shrink our heat shrink tubing, we recommend the use of a CABAC heat gun (Part No. HG2232 or HG2233).
CABAC blue polyolefin heat shrink tubing is UL certified and complies with a number of international standards, including ASTM D2671.
DIMENSIONS
Pre-shrink diameter: 4.8mm
After-shrink diameter: 2.4mm
Recovered wall thickness: 0.48mm
Length: 100m roll
XLP tubing is available in a wide range of colours and sizes from 1.5mm to 125mm. The product datasheet includes a selection chart for your reference, see Resources.
TECHNICAL DATA
Compliant Standards: UL224 VW1 File No. E366157, ASTM D2671
Continuous Operating Temp: -75 to 135 degrees Celsius
Shrinkage Temp: > 105 degrees Celsius
Longitudinal Shrinkage
Tensile Strength: 10.4 MPa
Breakdown Voltage: 25 kV/mm wall thickness
Elongation at Break Point: 400%
Water Absorption: 0.15% max
Voltage Rating: 600V
Heat Shock: 250 degrees for 4 hours
PLEASE NOTE: The full range of XLP heatshrink is UV stabilised except clear. Non-black colour variants will fade slightly or change colour over time dependent upon the strength of the UV radiation without impacting the materials functional characteristics
Heatshrink Colour: Black
Heatshrink Type: Thin Wall Tube
Product Colour: Black
Wall: Thin
Pre-Shrink Diameter (mm): 4.8
After-Shrink Diameter (mm): 2.4
Heatshrink Tube Length (M): 100
Recovered Wall Thickness (mm): 0.48
Glue Lined: No
$149
Your message is on its way
The seller will be in touch. We monitor all messages to help keep buyers and sellers safe.
Stay safe: buyer safety tips
T
Tradingpost sellerVerifiedVerified Tradingpost seller
You may also like
Electronic Components$1,000$851 moreNegotiable
NEW AND USED ASIC MINERS (BITCOIN MINERS )
Audio Systems$215$66 more
Vintage Aiwa JS-215 Walkman Cassette Player - Serviced
Cameras$345$196 more
Pentax K-r 12.4 Megapixel Digital SLR Camera + 18-55/3.5 Pentax Zoom - Gold
Audio Systems$425$276 more
Vintage Silver SS-1405WA 3 in 1 Stereo System with Speakers
Audio Systems$285$136 more
Sony PS-LX310BT Semi-Auto Belt Drive Turntable with Bluetooth
Scooters and Mobility$2,000$1,851 moreNegotiable
Pathfinder 140xl mobility scooter
Mobile Phones$700$551 more
iphone 16 pro 512 gb New
Audio Systems$435$286 more
Vintage Technics SL-B2 Semi Auto Belt Drive Turntable
Consumer Electronics$1,169$1,020 more
Monitor Audio Silver 100 7G Bookshelf Speakers - BLACK FRIDAY SALE
Consumer Electronics$7,199$7,050 more
Technics SL-1210G Grand Class Direct Drive Turntable Black - BLACK FRIDAY SALE
